標準編號 |
規范中文名字 |
規范英文名字 |
GB/T4213-1992 |
自力式調節閥 |
Pneumatic industrial process control valves |
GB10869-1989 |
發電廠調節閥門技術條件 |
Specification of control valves for fossil power stations |
JB/T7228-1994 |
電動風閥 |
|
JB/T57182-1994 |
自力式調節閥產品品質分等 |
|
JB/T57218-1994(2005復核) |
自力式調節閥穩定性規定與考核方法 |
|
HG/T3237-1989 |
橡塑機械用自力式調壓閥 |
|
NF C46-503-1999 |
工業生產全過程調節閥門.第2-1一部分:總流量.在組裝標準下液體流量的橫截面方程式 |
(Industrial-process control valves. Part 2-1 : flow capacity. Sizing equations for fluid flow under installed conditions.) |
NF C46-502-1993 |
工業生產全過程用調節閥門.第1一部分:專業術語和總論 |
(Industrial-process control valves. Part 1 : control valve terminology and general considerations.) |
NF C46-506-1990 |
工業生產全過程用調節閥門.總流量.總流量的特點和矯正的原有指數 |
(Industrial-process control valves. Flow capacity. Inherent flow characteristics and rangeability.) |
NF C46-525-1991 |
工業生產全過程用調節閥門,調節閥的限制柵屏 |
(Industrial-process control valves. Control valve data sheet.) |
NF M62-301-4-2001 |
密封罩用部件.第4一部分:自然通風和汽體清理系統軟件(如:過濾裝置和蒸汽疏水閥)的安全性和調節閥及其調節和保護設備 |
(Components for containment enclosures - Part 4 : ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices.) |
ANSI/UL 144-2001 |
壓縮天然氣調壓閥的檢測標準 |
(Standard for Safety for Pressure-Regulating Valves for LP Gas) |
EN ISO 5135-1998 |
聲學材料 在混響室中測量中央空調智能終端、中央空調終端設備模塊、減振器和調節閥的噪音輸出功率級 |
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) |
EN 88/prA2-2001 |
通道工作壓力200毫巴下列的燃氣器具的調壓閥 改動A2 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2 |
prEN 14129-2001 |
液化石油汽(LGP)罐調壓閥 |
Pressure relief valves for LPG tanks |
EN 88-1991 A1-1996 |
通道工作壓力200毫巴下列的燃氣器具的調壓閥 |
Pressure governors for gas appliances for inlet pressures up to 200 mbar |
DIN V 19259-2-1999 |
機器設備參考文獻.調節閥門需帶歸類平面圖的基本數據類型 |
(Documentation of devices - Standard data element types with associated classification for valves) |
DIN EN 60534-6-1-1998 |
工業生產步驟調壓閥.第6一部分:調節閥推動的部位控制器固定不動用組裝關鍵點.第1節:行程安排推動上部位控制器的組裝 |
(Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997) |
DIN 3163-1974 |
公稱直徑25的冷卻液循環系統直達調節閥門 |
(Control through valves for refrigerant circuits, nominal pressure 25 bar) |
DIN 32730-1993 |
供暖設備中水和蒸汽用具備安全功能的調節閥門.安全生產技術規定和檢測 |
(Valves with a safety function for water and steam in heating systems; safety requirements and testing) |
DIN 58600-2003 |
吸氣保護裝置.法國消防大隊用調節耗氧量O2調節閥門與單獨引路空氣壓縮呼吸面罩面具中間的插塞聯接 |
(Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade) |
UL 144-1999 |
壓縮天然氣調節閥門 |
(LP-gas regulators ) |
UL 17-1994 |
汽柴油機器設備用通風口或煙筒射頻連接器調節閥 |
(Vent or chimney connector dampers for oil-fired appliances ) |
JIS B8387-2000 |
液壓.四孔調節閥和四孔方向控制閥門.02,03,05規格.夾緊規格 |
(Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions) |
IEEE 1189-1996 |
大型設備用調節閥門鉛酸電池(VRLA)電瓶的選用手冊 |
(Guide for selection of valve-regulated lead-acid (VRLA) batteries for stationary applications) |